|
|
 |
Seiler Instrument (St Louis Office)
Trimble GPS Training Schedule
No courses scheduled at this time.
Call us to set up a custom course:
Toll Free: (800) 489-2282
RTK Install Class:
1 day class - $250/person
Comprehensive Class Covering the Basics of Real Time GPS Surveying, the uses of the equipment, calibrations and
coordinate systems, field exercises, and over view of Trimble Geomatics Office. This class is designed for the
beginning user, or for users that need a refresher course.
Understanding Calibrations:
1/2 day seminar - $125/person
An overview and in depth discussion of Calibrations as used in RTK and Post Processed Surveying. This class is
intended to aid in understanding what the TSC1, TSCe and Trimble Geomatics Office software does when a calibration
is done. Including: Suggested Observation Techniques, Proper Point Location, and Results Analysis. This course
covers the same information as the Certified Course does but takes the subject a bit deeper.
Advanced RTK Class:
1 day class - $250/person
This course is for the user comfortable with the TSC1 or TSCe that wants to get more out of the equipment. Topics covered
will vary but may include: Feature Coding, Offsets, COGO, Multiple Bases and Tips and Tricks for everyday use.
Network Design Seminar:
1/2 day seminar - $125/person
This seminar is designed to give an overview of how to design a proper Static/Faststatic Network. The group will
be ask for input on multiple examples, and discussion will be held on why certain networks are good or bad.
Trimble RTK Certified Class:
3 day class - $995/person
This is a formal class that includes lecture, field, and office work. The course work covers: How GPS Works, System
Components, Configuring the System Properly, Equipment Assembly and Set-up, Intro to Trimble Geomatics Office,
GPS Site Calibrations in TGO and TSC1 or TSCe, Topographic Survey Procedures, Postprocessed Infill Surveying, Field
to Finish, and Data Analysis in TGO.
Trimble Post Processed Static/Fast Static Certified Class:
3 day class - $895/person
This formal class covers Static and Fast Static GPS Surveying Techniques through lecture and office work. The
class includes only a couple of field exercises covering site recognizance and mission planning, the main part of
the class will cover Network Design, Overview of Trimble Geomatics Office, Steps of Processing and Adjustment of
data in Trimble Geomatics Office.
|
|
Certified Trimble training provided
using Trimble GPS Surveying Equipment |
Note: Enrollment must be received one week before scheduled
classes. Minimum class size (Seiler) is 5 persons. Seiler Instrument reserves the right to cancel or
reschedule classes due to low enrollment.
Prices are subject to change.
Cancellation policy: Cancellations 7 days prior to class, No Charge.
Cancellations within prior week, 50% Charge. No shows, 100% Charge.
|
|
