|
Model VM80
The VISIONMASTER Day and Night scope is state of the art, using only the very latest in night vision
technology to give the rifleman the utmost advantage in both day and night shooting situations with the same equipment.
Night Scope
Day Scope
To switch from day mode to night vision mode requires the operator only to disengage a spring loaded
locking pin, remove the eye piece by sliding it to the rear 3/4 of an inch and sliding the night vision module onto the
scope, the spring loaded locking pin engages automatically. The complete transition can be completed in no-light conditions
in less than 30 seconds.
The Day and Night scope is available with the following intensifier tubes:
- 64 line pair 3rd generation
- 56 line pair 3rd generation
- Standard 3rd generation
- 2+ generation
| Magnification: |
6-16 power variable |
| Objective Lens: |
80mm |
| Objective Lens F number: |
F1.6 |
| Exit Pupil Diameter: |
13.3mm at 6x
5mm at 16x |
| Field of View (3.3 degrees): |
17.5 feet 100m at 6x
6.55 feet at 100m at 16x |
| Focus Range: |
30 Meters to infinity |
| Eye Relief: |
30-89mm at 6x
49-77mm at 16x |
| Power: |
2 AA batteries |
| Weight: |
Day Scope: 4 lbs 2 oz.
Night Scope: 5 lbs 3 oz. |
| Main Tube Diameter: |
40mm |
| Length: |
Day Scope: 17 1/4 inches
Night Scope: 18 1/4 inches |
| Adjustments: |
1/4 MOA clicks, 60MOA full travel |
| Mounting: |
40mm mounting rings included. Standard Leupold Ultra bases required |
|
